1

I have a grid sheet drawing of a smog scrubber. It is to be glued ontop of a model articulated bus. The picture will be used as a crowdfunding promotion for the realife filters. 25mmm*14mm*10mm. Can you make the stl. file and print the part in fine detail?

1 Like
2

Hi there !

I offer professional CAD services beside printing.

I could definitely construct the part and depending on it’s level of detail i can also print it. If it has complex features that are smaller then 0,4mm³ then i could probably not (depeding on the kind of detail, with small layers i can archieve very high details)

I offer alot of materials and may colors (more colors upon request). I print with dual extrusion so i could make the part with two colors.

Please send me the drawings of the smog scrubber so that i can estimate the cost for construction.

Also that would help so that i can determin if this is printable for me.

marius.breuer@cad-breuer.de

https://www.3dhubs.com/siegen/hubs/marius/

Hope to hear from you,

Marius

3

yes sure just reply and I will help you will anything.

1 Like
4

Hi,

we offer CAD design and 3d printing services, just send us your information @Modellus for a quote. ^^

5

Greetings to Lyon,

Here is the information. This idea is open source so you are free to utilate it in France. Please quote.

Slán

Peter
Model Bus with Scrubber Draft 0 .5.jpg

SMOG SCRUBBER Grid Sheet Final Draft 002.jpg
SMOG SCRUBBER Grid Sheet Final Draft 002.jpg1275×1750 293 KB

6

Sorry for the delay. This is an open source idea. Please quote.

Peter
Model Bus with Scrubber Draft 0 .5_0.jpg

SMOG SCRUBBER Grid Sheet Final Draft 002_0.jpg
SMOG SCRUBBER Grid Sheet Final Draft 002.jpg1275×1750 293 KB

7

I sent an electronic mail.