1

So i rebuild my Mendel90 and is looking at tweaking slicer settings

Currently they are: [profile]layer_height = 0.3wall_thickness = 1.2retraction_enable = Trues - Pastebin.com

Printing at 210 degrees 3d benchy look like this: http://imgur.com/a/tuFm0

if printing at 200 it looks like this: http://imgur.com/a/e4ayq

Its PLA… sadly one of the shiny ones :-/

Is there anything in Cura in could change to improve it?

1 Like
2

upgraded to cura 2.3.1 and slicer settings export now looks like this: PK ! °'  mendel90_0.3mm[general]version = 2name = 0.3mm - Pastebin.com