1

Where can I purchase just the nozzle for the Da Vinci 2.0? I can’t find parts anywhere for this thing.

1 Like
2

Let me know if you find nozzles.

I am about 99% sure you can’t replace just the nozzles. I believe you have to buy the whole unit, I believe $160.

This part will make your Da Vinci a 2.0A according to XYZ.

http://us.store.xyzprinting.com/?cateId=0&navId=2

1 Like
3

That’s currently what I have, a 20.A. Unfortunately these nozzle’s are made cheap and bend easily.

4

Please send me a mail and i will make sure you can order the part via our webshop.

Albert Falck

lay3rs 3dprinting

www.lay3rs.nl

5

You guys sell XYZPrinting Da Vinci parts?

1 Like
6

where are u from? if you live in europe , you can post your question on FB page Facebook

7

Is there a US page?

1 Like
8

Us has an online store. If you’re in Canada a new head can be ordered through studica.ca. you have to buy the complete extruder drop in assembly not just the nozzle. Most people are just doing a conversion to e3d v6. Like much of xyzprintings product factory parts aren’t the greatest.

9

Do you have a link of the conversion for a 2.0a. I have looked at mine but everyone on YouTube has the 2.0 and there are differences on the board

1 Like
10

I haven’t found anything for more than the set up to mount the e3d v6 into the carriage for a 1.0 which I would assume you just need to do twice for the 2.0. As for the bowden mounting I haven’t found anything but I don’t think it’ll be too difficult to set something up.

11

I sent you a message on your website.