1

made my latest Marvin

I made my Marvin with these settings on my Ultimaker Original+

the best results so far:

  • layer height 0.06 mm
  • printspeed 10 mm/s
  • fill density 50%
  • printing temp. 175 C
  • bed temp. 0 C
  • brimm support

Marvin_31jan05_0.jpg
Marvin_31jan05_0.jpg1296×925 30.4 KB

5 Likes
2

Always good to see Marvin here on Talk :wink: Thanks for sharing, Rob!

3

Hey @Rob_3D, Good job! Ya think 60 microns is necessary though??

Think my Marvin was, like 200.

Cheers!

AndyL

Pot8oSh3D

4

He seems to “wink” a bit :wink:

Where does the fan come from, relative to the Marvin?

5

In front of his face

6

Great print! I’ll play: just finished printing my test Marvin on the UMO+:

Settings in Cura:

Layer Height: 0.1mm

Printspeed: 20mms

Fill density: 0

Printing Temp: 210 C

Bed temp: 70 C

no supports

Printed in Faberdashery PLA ‘Electric Blue’

UltiMarvin02.JPG
UltiMarvin02_0.JPG1974×1179 1.39 MB

2 Likes
7

Looks good Kvones!

i’m gonna try these setting’s to

8

Ok, so that’s good :slight_smile:

9

Looks great, @kvones! Well done!

10

thanks for the settings-will try once more.

borge