I can't find a troubleshooting guide for flashforge

Sean_Watson · 2016-09-18T05:30:01.000Z

What I mean by a trouble shooting guide is a list of error conditions and a list of possible causes and fixes for each error arranged in a table. I guess I’m a little old school.

Oscar_svensson · 2016-09-18T12:48:29.000Z

This list isn’t for the flashforge specifically but Rather some general fixes to printing problems. http://reprap.org/wiki/Print_Troubleshooting_Pictorial_Guide

Hope it helps!

Perry_1 · 2016-09-18T14:09:08.000Z

Your printer runs software (firmware) called sailfish. Common issues listed here http://www.sailfishfirmware.com/doc/troubleshooting-common-issues.html

The complete manual is here http://www.sailfishfirmware.com/doc/

ClickNPrint3D · 2016-09-20T10:23:25.000Z

This is the best one mate. Print Quality Guide | Simplify3D Software

Ironwood_Eng · 2016-09-20T11:08:20.000Z

I looked for one for quite a while and never found one either. In general, there is little information out there specific to the Flashforges. The recommendations previously made are darn good resources.

iTech3DP · 2016-09-20T14:48:23.000Z

I happen to be a distributor and would gladly share the manual with you all. Well, the one attached is from Flashforge directly.

Cheers,

Chris
Flashforge after-sales service Manual.pdf (7.66 MB)