1

OK, have completed the Marvin thing and still can not see my hub listed?

2

Hi @RSSoton, from what I can see, you still need to receive your first review on the Marvin print. Please refer to the Marvin order page to see what you need to do in order to complete this. Keep in mind that user reviews and ratings are very important for customers when picking a Hub.

Also, here are some helpful tips on how to improve your Hub page: Talk Manufacturing | Hubs. Hope this helps

Good luck on your review!

3

Hi @gabriela3d

From what I can see I have completed all enteries???

4

Hey @RSSoton, the Marvin order instructions state that you need to upload images of your Marvin next to a coin and a handwritten note of your Hub’s name. Once you do that, you’ll receive your first review! Gabriela

5

Hi @gabriela3d

I have done that pictures of the coin, no instructions of a handwritten note, so confused?

Regards @RSSoton

6

Oh, so sorry about the confusion! So I had a look at the initial instructions on your order page and number 3 states leaving a handwritten note with your Hub’s name. Please see below. Hope this helps and let me know if you have more questions.

  1. Print me standing upright , without support and in indicated layer height:
  • Ultra: 0-25 Microns
  • High: 25-100 Microns
  • Medium: 100-250 Microns
  • Low: 250-500 Microns
  1. Take multiple clear, focused pictures of me from different angles
  2. In the picture leave a handwritten note of your Hub’s name
  3. Upload the pictures to the order page
1 Like
7

@gabriela3d , handwritten note added

8

Hey @RSSoton, apologies once again for the confusing instructions! Basically what we want from new Hubs is to upload pictures of their Marvin print next to a coin and a handwritten note uploaded on the order page. This is mainly a verification procedure, as with so many Marvins all over the interwebs, we want to make sure that it’s your printing skills we’re assessing. Sorry again for all the trouble and thanks for your persistence :slight_smile:

1 Like
9

Hi @gabriela3d

I have tried to upload a handwritten note to the order page and it keeps giving me an error message, I have added to the images section

regards

10

I see, but please notify Marvin Senior Robot (or @ferkan) on the Marvin order page that you did so, so they’re able to check your print and the handwritten note. And again, please make sure your Marvin print is in the same image with the handwritten note. Thanks.