Flashforge Creator Pro - Colorfabb Ngen printing

pro343 · 2016-03-16T05:44:24.000Z

I tried to print 75-85C bed and 225-235 head but very bad result.

I used 3dlac or elmers purple and fan speed 50-100.

aero3D · 2016-03-16T09:50:47.000Z

I use Colorfabb NGEN on my U2 with settings as below using 3DLac and it is perfect every time. No lifting, warping and very clean print.

HBP: 85c

Extruder: 240c

3dprintwiz · 2016-03-16T11:50:17.000Z

Hi,

I use ESUN ABS + , with 3mm Ordinary Glass plate on top off my Heated bed. Settings are as follows :

Extruder : 230C

Bed : 110C first Layer, 100C second Layer

Fan Cooling : 100% after the forth layer

Been getting amazing results lately .

pro343 · 2016-03-16T19:10:07.000Z

240/85 60mm/s 3Dlac

pro343 · 2016-03-17T05:42:24.000Z

I have problem with spool holder. Thats why not working.