1

Hey there i’m new around here so please don’t hesitate to tell me what i’m doing right or wrong, thanks.

Anyway, I managed to buy my very first EZT3D T1 3D printer and i have finished assembling the entire thing. I plugged it in and it seemed to start up just fine. But when i tried to start the auto levelling system following the instructions on youtube, only one of the sliders moved up the rail, forcing the head to push against the rail and stop the rubber belt from moving. I quickly unplugged it from the power to prevent the motor from destroying the belt. I have tried a few more times to auto level, but the same issue appeared where only the one slider would move.

The problem now is that my LCD will no longer power on, and so i can’t control anything. The power supply seems to work as it powers on.

I’m just wondering if it’s possible that i may have damaged the main controller when i kept unplugging it from the wall. Or maybe i damaged it from spinning the motor during installation of the belts, as i noticed the LCD screen would turn on when i spun it hard enough. Is that possible?

Anyways, any help would be truly appreciated, as i really want to get this printer working and start my 3D journey :smiley: