6

Ups, sorry for the mixup! You’ll soon receive a mail with the instructions on how to proceed with the activation of your Hub, in max 24 hours.

Until then, feel free to have a crack at Marvin here: 3D Hubs Marvin - Key Chain by HubsMFG - Thingiverse. Just keep in mind you’ll need to validate both your printers, so you’ll need to 3D print one Marvin each.

Nudge me if Marvin doesn’t hit your inbox any time soon. Cheers!

1 Like
7

Thank you Gabriela!

8

Hello Gabriela,

Marvin never did hit my inbox or anything else from 3D Hubs. But thank you for the link to Thingiverse. Having worked at MakerBot it’s a site I’m pretty familiar with. I’m currently working on printing one of the transmission prints. I’ll post it when it’s assembled.

I’m not sure where I’m supposed to post these but here are the pics of my Marvin. The neon orange was done in PLA on the Rep 2 and the army green on the MakerBot 5th Gen. Both in 100 micron resolution. Took the pics with my phone.

Can you let me know the know the next steps?

Thanks,

Jack

Two Marvins.JPG
Two Marvins.JPG2016×1512 560 KB
Marvin Rep 2.JPG
Marvin Rep 2.JPG2016×1512 629 KB
Marvin 5th Gen.JPG
Marvin 5th Gen.JPG2016×1512 916 KB

9

Both Marvins look great, thanks for sharing them here @J3DServices!

@Arnoldas are you able to look into this? @J3DServices listed their printers yesterday, but still haven’t received any email regarding the Marvin review. Thanks

10

@J3DServices. You have never registered as a Hub on the platform, therefore you never were prompted for a review. Go to your profile to add the printer and we’ll start the process, Your Marvins do look great!

If you need any advise along the way don’t hesitate to leave a comment :wink:

11

Thanks for clarifying this, Arnoldas!

@J3DServices So basically what you have to do is go to your User Dashboard -> Edit my account -> scroll down for Roles and here you have to mark Hub as well. Let us know how you go!

12

Hello Gabriela and Arnoldas,

Thank you both for your help. I’m on the “Edit My Account” page and I don’t see any fields or check boxes that say “Roles”. I also did a screen search just to be sure. I’ve read every line on the screen and don’t see where I register as a hub. Can you advise please?

Glad you like the Marvins! I printed all the parts from the transmission file on Thingiverse and expect to have it assembled in the next few days. I’ll post it when I do.

Thank you!

Jack

13

Hey Jack, I’ve attached a screen grab of where you should look for the Roles section on your Edit my Account tab. Let me know if this helps.

Edit_My_Account___3D_Hubs.jpg
Edit_My_Account___3D_Hubs.jpg998×943 69.9 KB

14

Hello Gabriela,

I am very appreciative of your effort to help me and I don’t mean to make simple things difficult. But I don’t seem to have the same choices on my “Edit My Account” page. What am I missing?? Here are my screen shots. No where does it say “Roles” or “Status”. ???

Thanks,

Jack,

Screen Shot 2015-11-19 at 9.06.38 AM.png
Screen Shot 2015-11-19 at 9.06.38 AM.png1201×871 47.8 KB
Screen Shot 2015-11-19 at 9.07.18 AM.png
Screen Shot 2015-11-19 at 9.07.18 AM.png1209×863 68.8 KB
Screen Shot 2015-11-19 at 9.07.39 AM.png
Screen Shot 2015-11-19 at 9.07.39 AM.png1216×865 71 KB

15

No worries Jack, we’ll get to the bottom of this :wink:

So, from what I can tell, if you go to the page where the first screen shot is taken and scroll down you should find the Roles section. So it should be below Passwords, then Status and then Roles. Does that work?

16

Did it work?

17

Hi Gabriela,

Thank you for the reply.

That’s what I’m saying. If you look at all three screen shots the fields “Status” and “Roles” are not below Password. I keep thinking I’m in the wrong place but at the top of the page it does say “Edit My Account”.

If you’re available to do a screen share with a Google Hangout or something I’m OK with it. I’m east coast time USA just so you know.

Thanks again for all your help with this.

Jack

18

Sorry about that, Jack, I know now what you mean. Let me look into it with the devs and I’ll get back to you. Thanks

19

Thank you Gabriela,

I’m around today if any suggestions come up.

Jack

20

Thanks, Jack! It must be a bug, so I’ll let you know as soon as I have some feedback from the dev team.

Thanks so much for your patience though!

21

Hey Jack, apologies for taking so long. Things are actually much easier than I thought! Basically all you have to do to set up your Hub is start adding your printers here: https://www.3dhubs.com/list-my-printer. And everything else will follow naturally :wink:

Let me know how this works for you.

22

Hello Gabriela,

Thank you for the follow up and the advice. I’m traveling for a couple of days but will take care of this when I get back.

I’ll let you know how it goes.

Talk soon,

Jack

23

Hello Gabriela,

Sorry for not getting back to you sooner. I was traveling for a bit and then took some time for the Thanksgiving Holiday.

I added my printers per your last post. Hopefully we’ll see them tomorrow but I’m sure I did that step before.

Thanks for all your help.

Jack

24

Hello Jack,

more people to the rescue :wink: Francesco from the Development team here.

Is J3DServices the user you’re trying to activate the hub with? Because I don’t see any hub associated with this user.

I just want to double check: did you manage to go through the process of activating your hub through this link Online 3D Printing Service | Instant 3D Printing Quotes | Hubs ?

Did you get to see the screen in the screenshot where you can set up the printers for your hub?

Let me know :slight_smile:

Francesco

Edit_your_Printers___3D_Hubs.png
Edit_your_Printers___3D_Hubs.png2274×1258 134 KB

25

Hey Jack, any news? My colleague @FrancescoB is here to help if you still have any problems with setting up your Hub. Again, apologies for the inconvenience.