1

I need to print the following files in black colour @ 200microns. I have come across some hubs that print for cheaper (about 3 - 4$), but unfortunately, the shipping cost is too high. I need a print from a hub which offers the print for around 3-4$ and shipping around 1-2$ (shipping is for Sri Lanka).

Below are the files.

One print from this: H_body_3_beef_130_motorseam.stl

One from this: H_top_4.stl

5 from this: Clip.STL

5 from this: Pin.STL

Pls calculate the cost fro PLA @ 200microns in black color, and let me know if you can do the job…

I have a little budget for this task. That’s the reason I’m asking for…

Thanks…

2

Hey Techpages, I remember estimating this print for you a little while back. Are there no hubs close to you to reduce the shipping issue or are all of the local hubs to high priced? There is no good way to negotiate shipping to you. Even commercial international is way more than what you are quoting. I attached a direct quote from USPS for an 8 ounce package.

Screenshot_2016-05-20-00-52-37.png
Screenshot_2016-05-20-00-52-37.png1440×2560 284 KB

1 Like
3

@SOC3D​ has offered the best solution. There are many hubs, including mine, that would charge what you want for the parts, but would have to charge what miaviator quoted for shipping. If we charged any less we would lose money on the whole order.

Maybe try requesting a quote from this hub since he is in Sri Lanka: https://www.3dhubs.com/colombo/hubs/sabeel

4

4 Months too late to reply, but there is a 3D printing lab in Kohuwala.

3D Concept Studio - http://www.3dconceptstudio.com/