Totally agree… Price=Quality 99% of the time…
A $10 part that otherwise would cost $30-$50 elsewhere most definitely implies a very low quality print, a sub standard material, and most certainly the customer would end up with an unusable part…
I have tried sending parts to other hubs for printing that had cheaper prices then my own, just to verify quality, and I can show pictures side by side, for my print and their print which was a much lower price, the difference is like day and night…
For a customer it is very important to realize that by ordering a cheap part and end up not being able to use it because the quality is sub standard and or not as expected, then eventually it will cost the customer even more money, before they get the part they initially wanted…
2 Likes
Along with most people in this thread, I disagree. I have a new-ish hub. I get damn near zero orders. It is NOT because hubs in my area have lower prices. It is because hubs in my area have more reviews. Most people are NOT shopping for the lowest price, they are shopping for the best/most reviews. I looked at your hub, and your reviews seem excellent, and there are many of them. I have some trouble comprehending that you would be threatened by cheap hubs, because many of those cheap hubs are just trying to get orders - to get reviews - to get to your level. You’ve already got an upper hand on the entry level hubs. Making them charge at the same level you are charging does not seem very fair to them either.
15 Likes
In reply to TruNorth.
We have worked very hard for three years to get 75 reviews and we constantly monitor other hubs to have our prices at the same range. By the way, all hubs start with five stars even if they have one review.
We used to get one order per week and while we still get inquiries, since the cheap hubs appeared we get a job only once a month. When we ask the client why he did not assign his print to us they say they found a better price.
One of the cheap hubs has collected 156 reviews in 6 months and his prices are still barely covering his operation costs. He is a 17 year old kid with no expenses, it is great to see young entrepreneurs but he is killing everyone else but the worst part is that now customers are expecting low, unrealistic prices.
That is precisely why there are minimum prices set across all industries. As a customer you know an approximate cost of eggs at any supermarket or the average cost of services like a Laundromat. Prices do vary but they stay within a range, that creates fair competition and to gain customers you would add a discount on support removal, free shipping, same day manufacture, etc. In our opinion this is how things should work and it would be on the benefit of the customers, you and 3D Hubs.
Regards,
Matterthings.
1 Like
Agree, and seems like a monopoly or price fixing to me. JUST MY OPINION! Thank God We live in a capitalist economy. 3d hubs has been great to me thus far… I love what they do, and how they do it! I can’t think of a way to make it any more fair. I just worry about myself, and the minimum amount I am happy to print for. I love to print and especially educate those whom have never printed before, I get a lot of personal satisfaction from this, and I consider this as a reward also. 3d printing set aside for a second… I know there are a ton of rivals in my industry That Would LOVE to fix my prices for me lol, but that being said I have seen it befor and time after time(here’s an example)… Kum and Go will pump gas at a loss just to put rival stores out of business. Having my own ability to set my prices is what keeps our markets fair and competitive. and maybe just maybe. This 17yr old knows a thing or two about cornering a market share and is just operating at a loss until he/she puts their competition out of business(or gets them to quit). I look at someone near me charging Way Super Low Prices as a GREAT thing…That way I don’t get the clients that only care about price…but my prices are low I think, but also allow for what I want to accomplish. I base my prices on Cost of filament, time and electric plus other random consumables… I Considered the printers a loss befor I purchased, with all the advances in technology and the rapidly dropping price points. also I am attaching a simple spreadsheet that we started to help us calculate cost. I would absolutely LOVE to see how others are calculating prices. I spent so much time trying to find a great resource to calculate cost ect… with not a ton of options. 
thank you everyone for taking time to read and HAPPY PRINTING!!! Please Don’t take away our freedoms 
and free market.
Copy of Formlabs costing.pdf (14.2 KB)
6 Likes
Please read the original post,
We are NOT proposing FIXED prices but a BASE PRICE that no one can go lower.
This will encourage everyone to improve the quality of their prints and offer added values like free shipping, complimentary support removal, etc.
All the products that you buy in any store have a base price unless they are in offer and that is the base of capitalism.
This has nothing to do with freedom but with fairness.
Regards
Claudia and José
1 Like
"Price fixing is an agreement between participants on the same side in a market to buy or sell a product, service, or commodity only at a fixed price, or maintain the market conditions such that the price is maintained at a given level by controlling supply and demand.
The intent of price fixing may be to push the price of a product as high as possible, generally leading to profits for all sellers but may also have the goal to fix, peg, discount, or stabilize prices. The defining characteristic of price fixing is any agreement regarding price, whether expressed or implied."
https://en.wikipedia.org/wiki/Price\_fixing
SOC3D
16
@Iceman24k,
Very well put.
We use these calculations to find a price range for FDM printing based on PLA/ABS/PETG:
These are rough numbers and ranges the actual figures are considered proprietary.
Electric:
200W-750W Low end and High end
$.15 per KWH cost (Includes lighting and cooling overhead)
$.03 to $.1125 operating cost per hour
Filament:
Wholesale $16 per spool, Retail $25 per spool
Waste 10%
PLA 1.25g/cm3 $.022 to $.034 per cm3 (petg and abs are a little different due to density)
Printer depreciation:
Take the total cost of the printer, divide it by 24 hours, then 30 days then 3 months (or 2160) which is the cost to acquire a new printer every 90 days. For printers over $2,160 we use 180 days or 6 months.
$0.27-$1.04 per hour
3D Hubs fee
Student Discount*
Average failure rate is under 10% of time and materials.
Based on that my last large “Draft Mode” print which is meant for rapid prototypes at a low cost not for production quality or display/presentation prints came in at $.10 per cm3 for a little over $225. The actual print cost including support removal was $168.01 based on the high estimates. Those prices include buying a new $5,000+ printer in 3-6 months (probably a markforged or resin based machine)
3 Likes
“That is precisely why there are minimum prices set across all industries.”
Where? Your hub must be located in Venezuela.
2 Likes
Dictionary:
“price-fixing: the maintaining of prices at a certain level by agreement between competing sellers.”
Wikipedia:
"Price fixing is an agreement between participants on the same side in a market to buy or sell a product, service, or commodity only at a fixed price, or maintain the market conditions such that the price is maintained at a given level by controlling supply and demand.
The intent of price fixing may be to push the price of a product as high as possible, generally leading to profits for all sellers but may also have the goal to fix, peg, discount, or stabilize prices. The defining characteristic of price fixing is any agreement regarding price, whether expressed or implied.
Price fixing requires a conspiracy between sellers or buyers. The purpose is to coordinate pricing for mutual benefit of the traders. For example, manufacturers and retailers may conspire to sell at a common “retail” price; set a common minimum sales price,…"
2 Likes
Awesome Breakdown Miaviator!!! AWESOME! Well composed and thought out, Thank You Very much for this and taking the time to write it! This helps me! THANK YOU!!!
1 Like
SOC3D
20
@Matterthings and others,
In case you are not aware, 3D Hubs already has “a base price that no one can go lower”. https://puu.sh/qqOvK/5bb3572f47.png I’ve run into this lack of freedom several times. I’ve tried to remove the startup cost and tried to give away free prints at Christmas time.
Imagine if someone is using a filament extruder they built at home and printing with FREE recycled plastic on a 3D printer they built or bought for next to nothing? Cost per cm3 could be down to $.01-$.02 or even sub penny. That Hub would already be forced to charge $1 per order + at least $.01 per cm3 even though there is a good chance they could make a profit at $.0075-$.008 per cm3. That is what the free market is about.
1 Like
Hello Mindfull.
Please read our post again. You brought the Fixed price idea into this conversation. We clearly have stated that we would like to see BASE PRICE so nobody can operate below cost making things fair for everyone.
From Wikipedia: Cost-based pricing strategy is based on the seller’s cost meaning that the set price covers all the costs of the production.
Reagards
1 Like
Why the aggression?
We are trying to be constructive and you have made your point.
If you think we are in Venezuela you must be located in Mars.
Regards,
Jose
1 Like
Now you are conflating an individual entity’s business strategy with the regulating of an entire market place. If you don’t understand that BASE PRICE = PRICE FIXING, and that this kind of thinking is counter productive and destructive anytime it has been implemented in history, then I don’t know what else to say other than I’m thankful you are not in charge.
3 Likes
Hello Miaviator!
Thank you, this is a great contribution.
Without saying that you are backing our proposal of a minimum price, your calculations are a great way to show that there is indeed an operational cost and that there should be a base price that no one should be able to go below.
Thank you for the time you have taken.
Regards,
José
2 Likes
Aggression? Just trying to debunk misinformation.
In my opinion the policy you are proposing is aggressive.
2 Likes
Hallo Mindfull.
“This kind of thinking is counter productive” according to? … You and the people that share your ideas.
If you are not capable of respecting other points of view and think that yours is the only truth, then we are also glad that you re not in charge.
One can tell that you just enjoy stirring things up just for fun. Please stay within the topic of our proposal.
You have voted against it and made your point. If you want to talk about capitalism and economy, please open another Talk.
Regards,
Jose (not from Venezuela but from Germany)
1 Like
So all of us must have the same operating costs? What if someone is running off solar panels? What about people who make their own filament?
1 Like
