Besides PM / inbox, a straight forward route is to ask Hubs for their Hub link. Then you can check their profiles and place the order directly if desired. Cheers cheers
Hello
We can print in PLA/ABS, but no colour yet, we are in the UK.
Pete
Easi3D
Hi guys: here is the direct link to out Hub: https://www.3dhubs.com/cape-town/hubs/rabbit Let me know how you would like to proceed. Harry
ONEDGE
23
Hi Abhi,
We can supply super high resolution ABS/PLA busts made with our custom made proprietary FFF printers. We can go down to 0.05mm per layer with a 0.25mm extrusion width, or for fast building we suggest 0.15mm layer with 0.5mm extrusion. I’ll be glad to show you some of our production object, or if you want we can provvide you a sample based on your test model.
We are also waiting for a Zcorp Spectrum Z510 that can print in full color sandstone, and we will be active from February or March 2015.
If you are interested you can contact me here: https://www.3dhubs.com/torino/hubs/onedge-design
Cheers,
Fabio
ps. I attach a comparison pict about resolutions of our printers.
Hi Abhi,
I would love to run a small production for you in PLA. Please have a look at http://www.doubleme3d.nl/ for some samples.
Best regards,
Merijn
https://www.3dhubs.com/rotterdam/hubs/bubblebit
obelix
25
@abhi_nandy Fell free to contact me, i’ve done a lot of PLA monochrome Bust and full-body miniatures.
obelix
26
Hi Abhi,
I have several MakerBot 3D printers that can print pla. Also on the projet 660 (full color) can be printed. If you want I can make them 
We print very frequently busts.
https://www.3dhubs.com/ghent/hubs/orlando
https://www.facebook.com/pages/3d-printing-Gent
regards,
Orlando
Fare3D
29
Hi @abhi_nandy,
We are Fare3D a 3d printing startup based in Milan, Italy (but we deliver all over the world).
We can print Full color with our 3DSystem Project 4500 (it prints with VisiJet C4 Spectrum material, a plastic material with excellent flexibility and strength) and Monochrome with ours ABS Makerbots 3D Printers.
For any other information please contact us on:
https://www.3dhubs.com/milan/hubs/fare3d
Joerg_4
30
@abhi_nandy
Hi Abhi,
I would love to print a couple of bust for you. PLA monochrome (32+ colors available) or BronzFill is possible.
Looking forward to your reply
My hubs site: https://www.3dhubs.com/bremen/hubs/joerg
Cheers,
Joerg
Hi Abni,
Please contact me regarding your busts we have a projet 660 full coulur
this is our bread and butter please visit our website abc imaging were you can find my details
Lee
Hi, I can help with printing in ABS and PLA. Do you have any more details on the requirments you need to meet like color of plastic, model size, where they are being shipped to?
Voudas
33
Hi, you can visit our web pages: www.b3d.gr and www.i3du.gr and our hub https://www.3dhubs.com/athens/hubs/3dbox-voudas and get in touch with us with more info about your project. This is what we specialize in.
Lil_3D
34
abhi_nandy,
I can help cover off as much of this volume as you would like in any of the requested materials. Drop me a line at my hub.
https://www.3dhubs.com/toronto/hubs/lil-3d-printing
Mark.
Hi there,
need some more help ? I have 2 finely tuned Ultimakers, can print PLA or sandstone. Good quality prints only. Been printing commercially in my Amsterdam print shop for 1,5 years now.
Regards,
Erik
Hi!
Abhi, i can help you with my Zcorp multicolor sandstone printer!
Best regards, Jeroen.
Tom_6
38
We can help you out with our Zcorp 650 full color sandstone printer.
We also have an Ultimaker, a Zortrax, a Tripodmaker, a Big Builder,
a Leapfrog, and a Roland DLP printer.
We are located in Antwerp, Belgium and have been printing B2B
and B2C for 2 years now.
Check us out : www.3dprintfactory.me
Hi Abni I can Help I have mendelmax , let me know if you need
Cheers, Gaetano
