Hubs heißt jetzt Protolabs Network. Weitere Informationen

Sofortangebot anfordern

Abstützung beim 3D-Druck: Eine Technologie-Übersicht

Erfahren Sie, was eine 3D-Druck-Abstützungsstruktur ist, wann Abstützung benötigt wird und wie sich diese auf die Qualität und den Preis Ihres Drucks auswirken kann.

Supports in 3D Printing: A technology overview

3D printing builds parts layer by layer, so there always has to be a previous layer to build upon. Depending on the specific 3D printing technology and complexity of the 3D model, you may need to produce your part with support structures. 

When deciding which 3D printing technology to use, it’s essential to consider support structures and how they affect the quality and price of your part. As well, support structures will have an impact on your part’s surface finish. Removing supports from a part often results in blemishes or surface roughness.

This article defines what support structures are for 3D printing, how they’re implemented for each technology and how using supports can affect your choice of manufacturing technology.

How do supports work for FDM 3D printing?

Fused deposition modeling (FDM) extrudes a metal filament onto a build surface along a predetermined path. As the material is extruded, it cools, forming a solid surface that provides the foundation for the next layer of material. 

With FDM printing, each layer is printed as a set of heated filament threads which adhere to the threads below and around it. Each thread is printed slightly offset from its previous layer, allowing a model to be built up to angles of 45 degrees. This way, prints can expand beyond the width of preceding layers of filament. 

When a feature is printed with an overhang beyond 45 degrees, it can sag enough to potentially ruin the print. This is when you need support structures.

Depending on the degree of the overhang, your FDM part may need supports

When do you need support structures for FDM?

Let’s imagine you have to 3D print models of the letters Y, H and T. 

An FDM printer can easily print the arms of the letter Y without requiring support structures. Even though these features are outstretched, they don’t extend past 45 degrees. 

The letter H, on the other hand, is a bit more complicated. If the center bridge is under 5 mm, it can be printed without support or any sagging. Support is required if the bridge exceeds 5 mm. In the example shown here, the center bridge is over 5 mm, so it’s printed with support structures. 

The letter T requires support for the top features extending from either side of the model. There is nothing for these out arms to be printed on and the material will fall down without supports. 

The image below illustrates these three examples. The support material is shown in light gray.

An illustration of when you need support structures for FDM

Here is how these models look when printed. The second image shows the result of the T printed without support. The surface has significant sagging and will require a lot of post-processing to clean up.

Models of a Y, H and T printed with supports via FDM
Without any support structures, FDM will fail to print the letter T

What is bridging in FDM?

In some cases, there is an exception to this overhang rule. 

Hot material can be stretched short distances between two points of a print. This method is known as bridging. Bridging allows parts to be printed without support materials and with minimal sagging. If a bridge is over 5 mm long, support structures are required if you’re hoping to achieve an accurate surface finish.


Curious about the price and material options for FDM?

Explore our FDM services Get a free, instant quote today


What are the disadvantages of support structures in FDM?

The potential need to use support structures is one reason why FDM is not always the right technology for your application. One of the limitations of using supports in FDM printing is that post-processing is then required, which results in marks or damage to the surface in contact with the support materials. 

Another issue is that layers printed on support structures will be less even because the supports won’t be stationary like solid layers of extruded filament. On top of this, supports can be difficult to remove from small, intricate features. This bit of post-processing could break your model. 

Furthermore, having to print support structures adds to the cost of FDM. Supports require additional printing material that later needs to be removed, creating more work (and waste) for the operator. More materials and more human intervention equal higher costs.

An FDM-printed puzzle piece with supports removed to show surface roughness

How much support material do you need for your FDM print?

The amount of material you’ll need for support structures will ultimately depend on the design. If you’re printing a replica of the Gateway Arch in St. Louis, for instance (like the example below), you’ll only need a limited amount of support placed in the correct location to allow accurate printing.

This model of the Gateway Arch in St. Louis shows how to use supports when printing an arch-shaped object

Now, if you’re printing a “ball in a cube” (shown below), you’ll need quite a lot of support material, which means a sizable amount of removal time as well.

Removing the supports in this example is complex and involves getting rid of each support element with needle-nose pliers while attempting to limit the damage to the surfaces surrounding the supports. Sanding or smoothing these surfaces after support removal presents another difficulty. 

However, without support materials, this model can’t be printed with FDM, unless you want to compromise on quality and accuracy. In this case—despite the added cost and print time—the additional support material used is essential to being able to print this design.

This close-up shows where supports are required when components are printed inside of other components

What are the two types of support structures for FDM?

FDM 3D printing uses two types of support structures. The most common (and best suited for most FDM partS) is a sort of flat accordion or lattice structure. The other is “tree-like” support, which has less contact with the print surface and can leave you with better surface finishes after post-processing. Though it’s less common, the latter is much preferred by some operators. 

The FDM printer operator will generally specify the type of support that best suits your application and minimizes the cosmetic impact it’ll have on your design.

These are two different types of support structures: According (left) and tree (right)

Are there dissolvable supports for FDM?

Finely-tuned printers with two print heads can print support structures with a dissolvable material that doesn’t tear away from the part. Instead, you can dissolve this material in a chemical solution that won’t adversely affect the printed model. 

This results in a better surface finish where the support is in contact with the main material, however, it can be expensive and time-consuming. 

All industrial FDM machines are equipped to use dissolvable support materials. For instance, you have the Ultimaker 3, which can print PVA that dissolves quite easily post-print.

Do you need support structures for SLA & DLP 3D printing?

Stereolithography (SLA) and Digital Light Processing (DLP)create 3D printed objects from a liquid (photopolymer) resin by using a light source to solidify the liquid material. 

Depending on the exact type of printer, you have two main methods of producing a model. Certain printers pull a model out of a vat that contains liquid material, solidifying it via a light source through a translucent window at the bottom (bottom-up). Others submerge the model into the liquid as the top layer is tread by a light source from the top (top-down).

To make sure that the prints adhere to the print platform and don’t float around in the vat, SLA and DLP printers almost always use supports. 

Support structures from these printers look like thin ribs, with only small tips actually touching the model to save material and printing time. The number of supports, their location, where they touch the model and the structure are calculated by the software and are dependent on the shape, orientation and weight of the part being printed.

SLA and DLP are some of the most accurate technologies, capable of printing even the smallest and most intricate objects with accurate detail. With proper post-processing, printing with support does not impact the quality of the part.

An SLA print with support structures

How do you remove support materials from SLA & DLP prints?

First, Isopropyl Alcohol (IPA) is used to wash liquid resin off your completed parts. Support structures can be either broken off the surface of the model or removed using pliers. The spots where the support was in contact with the object are then sanded to remove any remaining marks.

Removing support structures from an SLA print

Curious about the cost and materials available for SLA/DLP?

See all SLA/DLP materials Get a free, instant quote today

Do you need support structures for material jetting?

Material Jetting (Stratasys PolyJet and 3D Systems MultiJet Modeling) technologies are similar to inkjet printing, but instead of jetting drops of ink onto paper, these 3D printers jet layers of liquid photopolymer onto a build tray and cure them instantly using UV light.

These printers require the use of support material in all cases where there are overhanging features, regardless of the angle. Supports are either water-soluble or are removed during post-processing using plyers, water jetting, ultrasonic baths and sandblasting.

Unlike FDM, supports for these technologies are in no way detrimental to a part’s cosmetic appearance, surface quality or technical properties. After proper post-processing, it’s practically impossible to distinguish where support materials were removed from your part.

Removing water soluble support material from a Polyjet (material jetting) printer

How do you optimize designs for printing supports with material jetting?

Post-processing for material jetting involves power tools like waterjets and sandblasters, and using these tools may damage or bend the more intricate features of your model. We recommend that you follow our Material Jetting rules to avoid these sorts of issues. In fact, you may want to opt to print your parts using SLS if your model has intricate features and thin wires.

Do you need support structures for SLS?

Selective Laser Sintering (SLS) 3D printers fuse powdered material in a chamber using a laser.

For SLS, there’s no need for support structures since the powder acts as a form of support when the object is built up layer by layer. This gives a lot of design freedom but also generally increases the cost and time to print a part. SLS requires time for the build chamber to cool down and cleaning the print requires a multi-step finishing process, including removing unfused powder, typically with an air gun.

When printing with SLS, the unfused powder surrounding the print functions as a natural support structure that's also easy to remove

Curious about the cost and materials available for SLS?

See all SLS materials Get free, instant quote today

Do you need support structures for binding jetting?

Binder jetting is similar to SLS in that the printer uses thin layers of powdered material to build up an object. Instead of using a laser to sinter layers together, however, binder jetting printers use a binding agent extruded from a nozzle to bind the powder together. 

Similar to SLS, there’s no need for support structures with binder jetting since the powder supports the object as it’s built. As well, you have to clean and post-processing the print over several steps, including removing unfused powder with an air gun or another tool.

Unfused powder being removed from a binder jetted print

Do you need support structures for metal 3D printing?

Metal 3D printing technologies use support structures to keep models fixed to a base plate during the building process. However, overhangs with an angle greater than 35 degrees can be printed without support. 

When you do need supports for metal 3D printing, it’s important to ensure that they are easy to access, or else it’ll be challenging and maybe even infeasible to remove them during post-processing. 

Using supports won’t impact the overall quality of your part, and with the proper post-processing methods, you can remove all marks from the printed model.

These metal prints, which are still attached to the print bed, still have visible support structures

Protolabs Network's top tips & tricks for optimizing 3D printing with support structures

Whether or not you need to use support materials for your specific application, it’s important to know the best practices for this aspect of the 3D printing process. 

  • Support structures will generally affect the cosmetic appearance of a part, so you’ll need to rely on post-processing to improve the surface finish after removing supports. Material Jetting is the exception to this rule. 

  • The more support structures you print, the more complex a design can be for certain 3D printing technologies. You can optimize the amount of support material you use by addressing part orientation and part accuracy (among other design and manufacturing factors) to lower the cost and print time.

Which 3D printing technologies require support structures?

At the end of the day, this is the most essential question. The table below summarizes whether support is required for each of the 3D printing technologies we offer at Protolabs Network.


3D printing technology Do I need support structures?
FDM (desktop & industrial) Depends on model geometry
SLA & DLP Always
Material Jetting Always (dissolvable)
SLS & MJF Never
Binder Jetting Never
Metal 3D printing Always

CNC machining, 3D printing and sheet metal fabrication parts

Frequently asked questions

Are support structures necessary for 3D printing? 

If your part has overhangs and bridges (and you’re printing with FDM or similar technology), then you likely need support structures. We recommend using technologies that don’t require them or opting for dissolvable support materials.


Which 3D printing technologies don’t need support structures?

SLS, MJF and binder jetting 3D printing never require support structures, so these are the preferred methods for more complex geometries.


What are the most popular support structures for 3D printing?

The most common (and most popular) types of support structures in 3D printing are called lattice supports. They work well for nearly all kinds of 3D models and are quite easy to create and customize. Their only drawback is that they can be tricky to remove and may leave marks on your part. 


Are support structures expensive? 

Supports will generally add to the cost of your final part, as they require additional print time and materials. On top of this, most supports aren’t reusable and go right into the waste bin. While the exact costs will vary based on the size of the part, the materials you’re printing with and what technology you’re using, the short answer is that supports will always make your manufacturing project more expensive.


 

CNC-Bearbeitungsressourcen für Ingenieure

3D Printing STL files: A step-by-step guide

3D printing STL files: A step-by-step guide

Learn how to avoid low quality 3D prints or unnecessarily large files by exporting your STL file in the correct resolution.

Weiterlesen
Selecting the right 3D printing process

What’s the right 3D printer for prototyping? Comparing 3D printing processes

What 3D printing process is optimal for prototyping? This article explores the best 3D printers for the prototyping phase of product development, including design advice to get the most out of each manufacturing technology.

Weiterlesen
Online rapid prototyping service

What is FDM (fused deposition modeling) 3D printing?

Interested in learning the basics of FDM 3D printing? In this article, we explain why this technology is an efficient and cost-effective choice for rapid prototyping and other applications.

Weiterlesen
Dimensional accuracy of 3D printed parts

What is dimensional accuracy in 3D printing and how do you achieve it?

What is dimensional accuracy in 3D printing and how do you know which technology will yield the most accurate results? This article compares the expected dimensional accuracy of various 3D printing technologies to help designers and engineers choose the right solution for their application.

Weiterlesen
3D-Druck und CNC-Bearbeitung im Vergleich

3D printing vs. CNC machining: Which is better for prototyping and end-use parts?

Is 3D printing or CNC machining better for your custom part applications? Learn the practical differences between CNC machining and 3D printing and how to select the right technology for manufacturing prototypes, end-use parts and everything in between.

Weiterlesen
Additive Manufacturing Technologies: An Overview

What are the types of 3D printers and what can they do?

What are the different types of 3D printers available for manufacturing today and what are their unique characteristics and capabilities? This article examines the main additive manufacturing technologies and goes into detail about every major 3D printing method.

Weiterlesen
The Advantages of 3D Printing

Die Vorteile des 3D-Drucks

In diesem Artikel werden die Hauptvorteile des 3D-Drucks im Vergleich zu traditionellen Fertigungstechniken erörtert.

Weiterlesen
The Additive Manufacturing Process

Der Prozess der additiven Fertigung

Erfahren Sie mehr über den allgemeinen additiven Herstellungsprozess vom Design bis zum fertigen Teil für diejenigen, die noch nie zuvor in 3D gedruckt haben.

Weiterlesen
How does part orientation affect a 3D Print?

Wie wirkt sich die Teileausrichtung auf einen 3D-Druck aus?

In diesem Artikel werden die Auswirkungen der Teileausrichtung auf die Genauigkeit, Festigkeit, Geschwindigkeit und Oberflächenbeschaffenheit von 3D-Druckteilen erörtert.

Weiterlesen
The impact of layer height on a 3D Print

Der Einfluss der Schichthöhe auf einen 3D-Druck

Erfahren Sie mehr über die Bedeutung der Schichthöhe und wie sie sich auf die Qualität, das Aussehen und die Festigkeit von 3D-Druckteilen auswirkt.

Weiterlesen
3D Printing geometry restrictions

Einschränkungen von Geometrien beim 3D-Druck

Erfahren Sie, wie groß ein 3D-Druck sein kann und wie sich die Elementdicke, Wasserdichtigkeit und gekrümmte Oberflächen auf die Qualität eines Drucks auswirken.

Weiterlesen
Supports in 3D Printing: A technology overview

Abstützung beim 3D-Druck: Eine Technologie-Übersicht

Erfahren Sie, was eine 3D-Druck-Abstützungsstruktur ist, wann Abstützung benötigt wird und wie sich diese auf die Qualität und den Preis Ihres Drucks auswirken kann.

Weiterlesen
3D Printing STL files: A step-by-step guide

3D printing STL files: A step-by-step guide

Learn how to avoid low quality 3D prints or unnecessarily large files by exporting your STL file in the correct resolution.

Weiterlesen
Selecting the right 3D printing process

What’s the right 3D printer for prototyping? Comparing 3D printing processes

What 3D printing process is optimal for prototyping? This article explores the best 3D printers for the prototyping phase of product development, including design advice to get the most out of each manufacturing technology.

Weiterlesen
Online rapid prototyping service

What is FDM (fused deposition modeling) 3D printing?

Interested in learning the basics of FDM 3D printing? In this article, we explain why this technology is an efficient and cost-effective choice for rapid prototyping and other applications.

Weiterlesen
Dimensional accuracy of 3D printed parts

What is dimensional accuracy in 3D printing and how do you achieve it?

What is dimensional accuracy in 3D printing and how do you know which technology will yield the most accurate results? This article compares the expected dimensional accuracy of various 3D printing technologies to help designers and engineers choose the right solution for their application.

Weiterlesen
3D-Druck und CNC-Bearbeitung im Vergleich

3D printing vs. CNC machining: Which is better for prototyping and end-use parts?

Is 3D printing or CNC machining better for your custom part applications? Learn the practical differences between CNC machining and 3D printing and how to select the right technology for manufacturing prototypes, end-use parts and everything in between.

Weiterlesen
Additive Manufacturing Technologies: An Overview

What are the types of 3D printers and what can they do?

What are the different types of 3D printers available for manufacturing today and what are their unique characteristics and capabilities? This article examines the main additive manufacturing technologies and goes into detail about every major 3D printing method.

Weiterlesen
The Advantages of 3D Printing

Die Vorteile des 3D-Drucks

In diesem Artikel werden die Hauptvorteile des 3D-Drucks im Vergleich zu traditionellen Fertigungstechniken erörtert.

Weiterlesen
The Additive Manufacturing Process

Der Prozess der additiven Fertigung

Erfahren Sie mehr über den allgemeinen additiven Herstellungsprozess vom Design bis zum fertigen Teil für diejenigen, die noch nie zuvor in 3D gedruckt haben.

Weiterlesen
How does part orientation affect a 3D Print?

Wie wirkt sich die Teileausrichtung auf einen 3D-Druck aus?

In diesem Artikel werden die Auswirkungen der Teileausrichtung auf die Genauigkeit, Festigkeit, Geschwindigkeit und Oberflächenbeschaffenheit von 3D-Druckteilen erörtert.

Weiterlesen
The impact of layer height on a 3D Print

Der Einfluss der Schichthöhe auf einen 3D-Druck

Erfahren Sie mehr über die Bedeutung der Schichthöhe und wie sie sich auf die Qualität, das Aussehen und die Festigkeit von 3D-Druckteilen auswirkt.

Weiterlesen
3D Printing geometry restrictions

Einschränkungen von Geometrien beim 3D-Druck

Erfahren Sie, wie groß ein 3D-Druck sein kann und wie sich die Elementdicke, Wasserdichtigkeit und gekrümmte Oberflächen auf die Qualität eines Drucks auswirken.

Weiterlesen
Supports in 3D Printing: A technology overview

Abstützung beim 3D-Druck: Eine Technologie-Übersicht

Erfahren Sie, was eine 3D-Druck-Abstützungsstruktur ist, wann Abstützung benötigt wird und wie sich diese auf die Qualität und den Preis Ihres Drucks auswirken kann.

Weiterlesen

Show more

Show less

Ist Ihr Design fertig? Laden Sie Ihre Teile für ein kostenloses, sofortiges Angebot hoch

Sofortangebot erhalten